Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners
Home Home Feedback Sitemap About Us Products Contact Us Home Feedback Sitemap
 
tuff coat polymers  

Structure Finish Paints / Texture Finish

 
Introduction :
Texture / Structure finish paint is a combination of different resins, suitable anticorrosive pigments & special additives. This system gives excellent non-yellowing property, very tough film with required flexibility. Paint film cures at slightly higher temperature than normal Strong system. In a single application texture or structure finish will be obtained with film build.This finish gives very nice aesthetic appeal.
The range of Application :
This paint is suitable for Exterior as well as Interior application mainly in control panels, machinery parts,toys,Automobile parts, Computer Tables, Steel Furniture.
Key Properties :
Over-coating or stipple finish is not required to get achieve texture / structure finish.
Excellent mar resistance
Hardness, Scratch hardness is equivalent to powder coating.
Excellent abrasion resistance.
Good water & weather resistance.
Unaffected by spillage of solvents, oils, & detergents.
Hi-Build film formation ( Higher DFT )
Application :
Before applications of Texture / Structure finish coat do all necessary pretreatment of the job. For M.S.surface,remove grease,oil & loose scale & other contaminations by using degreasing agent. Blast clean the surface before primer coat is fully cured before application of structure coat. Do not add any thinner in paint, Apply Tuff Coat Structure finish at 40-60 psi on primer coat with minimum DFT 50 Microns.1st coat should be horizontal, then give 5-10 flash off, another coat should be vertical while application see that the primer coat will be covered properly. Give 10-15 air flash off & keep the object into oven at 130-140oC for 30 while application structure / texture pattern automatically appears on the object.

After stoving film shows excellent tough & textured finish. After use of paint, close the container immediately to avoid solvent losses & thickening of paint. Thickening of paint may disturb the pattern of paint film. Do not apply the paint in very high humid condition, during raining or mist  & fog or at very low temperature.
 
 
Home Feedback Sitemap About Us Products Contact Us Home Feedback Sitemap Industrial Paints, Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners